Instructables.com

Instructables.com
Share

Instructables.com

 •  December 2, 2017

Water Rocketry is a relatively unknown but awesome hobby. Why? Because you are able to build really good performing rockets without any expensive equipment or tools. We are a small team of students from Germany who have been building water rockets for almost seven years now. In this long time, we have learned a lot about building water rockets...

Instructables.com

 •  November 6, 2017

I have been recycling hdpe into components for different projects. See some examples in previous instructables. In my collecting of buckets for hdpe #2 , I have also gotten buckets marked #5 polypropylene and many of the bucket lids are #5 also. Then I was given several lounge chairs from swimming pool that were #5 polypropylene. I had been...

Instructables.com

 •  November 6, 2017

Disclaimer: I don't own the rights to the logo, didn't create the original logo, and all rights are held by Apple... or something. I don't know the legal aspect but I think that covers it. I don’t provide any warranty to anything, the onus is on you to not screw up, double check the information provided, and check your own work! Thanks and...

Instructables.com

 •  November 2, 2017

In this Instructable I will go through the process I took to make a small table with Surcrete. In this case, in the form of an mini ironing board. This was an exploration in form and the process from digital to physical. I will gloss over the earlier steps to concentrate on the actual mold making and pour process. Step 1: Going From 3D Model to 3D...

Instructables.com

 •  October 30, 2017

I made a home made CNC with a spindle with external Ø=65mm, and at that time I had available a plastic bracket that I used to hold the spindle on the machine. Right now I need more rigidity, so I decided to make two brackets and mill them to the spec. So just to clarify, I could make the part directly on the CNC (But, where is the fun of it?), so I...

Instructables.com

 •  October 21, 2017

Hi everyone! In this quick instructable I'm gonna show you how to recycle HDPE plastic bottles and jugs to create blocks that can be used in lot of different ways. Every day each of us uses and throws away lot of plastic stuff...let's change this! Dave Hakkens (which I suggest you to follow and check his job) is an awesome guy who made lot of...

Instructables.com

 •  October 20, 2017

Short Description Learn how to build a soft, pillow-like robot using polyurethane RTV molding! [Difficulty: Easy to Medium] Long Description Soft robotics is an exciting new sub-field in the broader category of robotics. According to Wikipedia: "Soft Robotics is the specific subfield of robotics dealing with constructing robots from highly...

Instructables.com

 •  October 13, 2017

3D Printed Adapter for PVC Pipe K-Cup Dispenser Like many people, I require coffee in the morning to help me begin to human correctly. Also like many other people my household has a Keurig. This is mostly great, I no longer have to try to remember how to grind coffee and not spill the grounds everywhere. However... Now I have to keep track of...

Instructables.com

 •  August 28, 2017

In this project you will create a master mold of a coaster then use a silicone mold to be able to produce many copies of that design. This project will require the use of a CNC milling machine. Step 1: Start Laying Out a Vector Design Vector designs use points and lines rather than pixels. These file types are much easier to use on CNC...

Instructables.com

 •  August 18, 2017

Make a little edge light for thin acrylic panels. Runs off a 9V battery and glows white. Can be attached to a hanging panel, or stand it on its built-in feet. This project was created for The Science Factory "Taste of Science" fete. All design work is by MDIM, courtesy of make717. It is based on our flashlight project and designed to light the logo...